Preparation
Before opening, gently massage the lash lift sachet to ensure the lotion is well mixed and warmed up to room temperature for optimal performance.
Open Sachet
Each packet contains enough product for 2-3 services. To extend usability & maintain effectiveness, carefully poke a small hole in the sachet or cut a very small opening at the top of the packet. This reduces exposure to oxygen, preventing the lotion from oxidation and becoming less effective.
Dispense & Seal
Dispense the amount needed for a single service. Immediately after dispensing, seal the opening with silicone tape to prevent any leaks.
Apply
Apply the lift lotion from the base to ⅔ of the way up the lashes. Ensure to avoid the tips of the lashes, as it can cause over-processing. Allow the lift lotion to process based on the lash thickness. We recommend using the “bend test” to assess the readiness of the lashes.
Remove
Once the processing time is complete, remove the lotion thoroughly. Continue with Set x Tint.
Tip
If using balm adhesive (containing natural oils), you may need to increase processing time by 20-30% as the balm can create a layer over the lashes, slowing the penetration of lash lift solution into the lashes.
TGA-Free Lift Lotion Processing Times
4-5 Mins for Fine Lashes
6-7 Mins for Medium Lashes
8-9 Mins for Coarse Lashes
10-11 Mins for Extremely Coarse Lashes
Set x Tint Processing Times
3 Mins for Fine Lashes
4 Mins for Medium Lashes
5 Mins for Coarse Lashes
6-7 Mins for Extremely Coarse Lashes